GUOSHI ADVANCED MATERIALS
Ceramic parts
for industrial furnaces
Radiant tubes, riser tubes, protection tubes, burner tubes and expansion joint boards for industrial furnaces, made in Zibo, Shandong, China.
Product photograph, background edited
3D PRODUCT VIEW
Turn the Si₃N₄-bonded SiC radiant tubes in 3D
An outline sketch of the radiant tubes. Drag to turn them and look at the mounting flange, the tube body and the closed end.
Product details →3D SKETCHNOT TO SCALE
Loading the 3D sketch…
Drag to rotate · buttons to zoomA 3D sketch of the outer form built from Guoshi’s photograph, not to scale. Dimensions and wall thickness follow the drawings Guoshi confirms.
- [email protected]
- Telephone
- +86 533 5375177
- Address
- Zibo, Shandong Province, China
- Office hours
- Mon–Sat 08:00–17:30 (GMT+8)
RHF
Reheating and pusher furnaces
What it makes
Billets and slabs brought to rolling temperature.
Typical duty
1200–1350 °C, oxidising, near-continuous. Skid systems carry load while hot.
Where we are in it
| Zone | Part | What goes wrong there |
|---|---|---|
| Burner blocks | Flame geometry drifting as the block erodes | |
| Skid insulation | Heat loss through the skid; black marks on the stock | |
| Hearth and wall | Slag attack and mechanical damage at the charge end | |
| Cast lining expansion joints | Expansion joint boards | Joint filler leaving too much ash, so the joint never opens and the lining cracks instead |
Zone-to-part mapping shows typical arrangements. Final selection depends on your furnace and operating conditions.